The V30 looks like a full wave rectifier with its twin anodes. The data given for the V30, however, states that it is a half wave rectifier and therefore the anodes must be connected in parallel. As the valve has a 30 Volt 200 mA heater, and this is consistent with universal equipment without mains transformers this looks correct. The V30 was made as a replacement product and not for inclusion in new equipment.

The classic envelope is 36 mm in diameter and, excluding the B5 base pins, is 86 mm tall.

 
Absolute Maximum Operating Conditions

Rectifier	Vh	Ah	Va	mAa
	30.0	0.2	275	120

This exhibit was last updated on 07 January 2007