The K302 klystron is for low power microwave power generation and was designed to operate at 9.32 - 9.5 GHz. The output is 30 mW and can be tuned electrically over a 30 MHz range. The beam voltage would be 350 Volts. The micrometer is the tuning adjustment. Output from the klystron is coupled directly to the integral waveguide 16.

The thin metal tube envelope is 25 mm in diameter and, including the IO base pins, is 112 mm tall. The waveguide 16 is 68 mm long, including the flange.

 
Pin Connections

IO	1	2	3	4	5	6	7	8	tc
	-	h	-	-	res	-	h,k	-	ref

 
Absolute Maximum Operating Conditions

Klystron	Vh	Ah	Va	mAa
	6.3	0.6	350	35.0

Thanks to Frank Philipse for supplying the above datasheet

This exhibit was last updated on 01 February 2008 {find valves by name}